Menu
Your Cart

Yaesu SCU 17 CAT interface with integrated sound card USB digital modes

Yaesu SCU 17 CAT interface with integrated sound card USB digital modes
Yaesu SCU 17 CAT interface with integrated sound card USB digital modes
Yaesu SCU 17 CAT interface with integrated sound card USB digital modes
Yaesu SCU 17 CAT interface with integrated sound card USB digital modes
Yaesu SCU 17 CAT interface with integrated sound card USB digital modes
115.00€
  • Stock: In Stock
  • Brand: YAESU
  • Model: Yaesu SCU-17 CAT
  • SKU: 203
  • EAN: 7438641848355

Yaesu SCU-17 CAT-interface with integrated sound card

The Yaesu SCU-17 is an interface for executing digital operating modes for almost all current Yaesu transceivers. The SCU-17 functions as a USB sound card, then only you need a USB cable between the interface and the computer. All signals galvanically Island interface to avoid potential ground loops. Thus the audio-in and audio out, PTT, FSK signals CAT and are transmitted. Key signals are separated by Opto-isolators, the audio signals of transformer coupling.

The SCU-17 is protected by a metal box to avoid problems of HF radiation. There are two control dials on the front panel for NF-levels (input, output). In this way the level of modulation can be adjusted in seconds without having to bother with the dialog box of the computer's sound card. In addition, the front panel has three LEDs that display the status of ' power ', ' PTT ' and ' FSK. The SCU-17 uses the USB port as power.

The expedition includes several cables, which simplifies working with existing Yaesu transceivers. Some models require an optional cable. The SCU-17 is designed so that even the classic RS-232 transceivers with a modern computer can be connected via USB.

The installation requires you to download and install the "virtual COM port Driver" on the company's website on Yaesu. Caution: install before you connect the interface to your computer! Drivers can be found on www.yaesu.com under ' products ', ' FT_DX1200 ', ' Files ', ' APOL-17 USB Driver (Virtual COM Port Driver).

SCU-expedition 17

    Transceiver Required cables FT-450 d same as shipment FT-817ND Option CT-62 needed FT-857D Option CT-62 needed FT-897D Option CT-62 needed FT-950 same as shipment Ft-DX1200 same as shipment FT-2000 (Variant 1) Option SCU-21 needed FT-2000 (Variant 2) self-made with CT-39/A needed FT-DX5000 (Variant 1) Option SCU-21 needed FT-DX5000 (Variant 2) self-made with CT-39/A needed FT-DX9000 (Variant 1) Option SCU-22 needed FT-DX9000 (Variant 2) self-made with CT-39/A needed

    OFFICIAL WARRANTY YAESU ITALY

    Of course, with self-made cables you can connect virtually all other transceivers, from other manufacturers. The SCU-17 interface pin configuration is specified correctly in the user manual.
     

     

    GET THE CABLES THAT ARE NOT INCLUDED AS PER THE LIST ABOVE

     

    Write a review

    Note: HTML is not translated!
    Bad Good
    Captcha
    We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

    The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

    Name
    Email