Menu
Your Cart

YAESU G 450C ROTORE

For medium duty applications for antenna systems for 2 m or 70 cm. Electrical and mechanical stop. The brake blocks the antenna, however allows the antenna to turn in case of strong wind. Gauge is auto-calibrating after switching on. To install the mast clamps: GC-038. The model G-650C is similar to the model G-450C, but has characteristics of a higher braking torque (see table). Suitable for small or medium-sized antennas HF directives for 2 m/70 cm. Both models have a rotation of 450° and the supports for mounting at mast. Easy connection to the cable, the control box has a socket wrench at 450 degrees. When used with a thrust bearing use a mast with a diameter of 50 mm.

THE PRICE INCLUDES THE CONNECTORS

 

TECHNICAL DATA

-surface wind 1 m ²

-100 K-factor
-Pair resist. brake 3000 kg/cm
-Torque 600 kg/cm
-Max 100 kg vertical load
-Max load vert. interm. 300 kg
-Error 0.5°
-Dimens. mast (mm) 32 ~ 63Ø
-Rotation Time. 360° 63sec./50Hz
-GPS elev Time. 180° N/A
-Diameter Boom N/A
-Rotator (Ø height) 170Ø x 263
-3 Weight, kg
-5 control cable Conductors

Write a review

Note: HTML is not translated!
Bad Good
Captcha
YAESU G ROTOR 2800DXC
Top Brand
High rotor characteristics for large antenna systems.Connecting door to 450 degrees rotation, overlap of 90 degrees to a more immediate direction ..
854.54€
Yaesu GS 050 thrust bearing
Top Brand
Thrust bearing for mast diameter up to 50 mm, with 4 bolts for the installation. The bearing can be used without platform with the tie rods (see photo..
42.02€
Yaesu GS 065 thrust bearing
Top Brand
Thrust bearing for mast up to 65 mm, 8 bolts, double rotating system project. For all other data show the model GS-050. Hole diameter on the base plat..
60.04€
YAESU G 1000DXC ROTOR
Top Brand
Now ... that's even more interesting ... New rotors designed for medium-sized and large antennas HF directives for the 2 meters with 450 degrees r..
465.00€
HAM-IV with analog controlThe rotors are designed for installation on a flat surface (Rotator Platform), for installation on the top of un..
748.98€
Connectors for the control cables for the Yaesu rotators
Top Brand
Set of connectors for Yaesu 25M-WP for Yaesu rotators. A 6 pin square connector to the control unit, a 7 pin round connector with rubber cap for rotor..
36.02€
Yaesu GC 038 rotor brackets
Top Brand
Set of brackets for YAESU rotators G-450, G650 and G-1000 These brackets are required when the rotor is installed at the top of the mast rather than o..
33.02€
Remote control for CG 3000
Coming soon
Remote control unit for CG-3000 has a facility to switch the power to the tuner, and show the current status (' tuned '). Comes with control cable and..
39.00€
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email