Menu
Your Cart

SUNSDR2-QRP HF and 6M direct-sample transmitter

SUNSDR2-QRP HF and 6M direct-sample transmitter
SUNSDR2-QRP HF and 6M direct-sample transmitter
New
SUNSDR2-QRP HF and 6M direct-sample transmitter
SUNSDR2-QRP HF and 6M direct-sample transmitter
Shipping in 7 working days COVID 19
Shipping times may vary based on certain conditions, for example if you are in a remote or uncomfortable place, times may vary.
Our strength? THE PRICE!
Unbeatable prices for goods always available and the best certified brands

The SunSDR2 QRP is the HF and 6M transceiver with 5W output power and a wide range of capabilities. Thanks to the constantly improving ExpertSDR2 software and advantages of the direct sampling the SunSDR2 QRP can solve any given task for a reasonable price. The SunSDR2 QRP can be used either locally via the LAN interface or remotely using the Expert Remote system, it gives you flexibility in arranging your working place as never before.

Main features

  • Immense functionality for a reasonable price
    Designing each our device, we try to reach the best balance between the price and functionality
  • Full support of the ExpertSDR2 software
    Continuously growing and improving ExpertSDR2 software is 100% compatible with the SunSDR2 QRP and will continue to support it for many years to come, for free!
  • External control connector
    Connect up to 8 external devices to 8 powerful keys with open collectors, such as PAs, external filters, rotate antenna devices etc.
  • Remote control operation
    Using it, you connect PTT and CW-key to the E-Coder panel. Microphone and E-Coder are connected to the remotely set up PC
  • TCI interface 
    Use it for seamless connection with third-party software, the list of software with TCI support
  • No need for an external soundcard
    The SunSDR2 QRP does not require an external sound card and audio cables, just plug your headphones in the transceiver and listen to the air
  • 16-bit ADC at 122.88 MHz
    The SunSDR2 QRP has the best ADC in its price range which provides 122 dB BDR
  • Sample rates: 48-384 kHz
    At the same time, you can use a 60 MHz wide bandscope + 2 software RXs, each has a SubRX
  • Special mode for 768 kHz or 960 kHz sample rate, only for 1 RX + bandscope at the same time
  • Supports 4M band only for RX in the 2nd Nyquist zone

 

Application field

  • HAM amateur HF transceiver
  • Remote operation just for fun and for contests
  • Spectrum analyzer with the wide bandscope up to 60MHz
  • Record IQ files and listen to them afterward

 

The ExpertSDR2 minimal system requirements:

  • 2 or 4 core CPU Intel Core i3 or Core i5;
  • 8 GB RAM;
  • 40 GB free space on the HDD/SSD for the ExpertSDR2 and accompanied programs;
  • 17' or bigger monitor;
  • video card with OpenGL 1.5 or higher;

The ExpertSDR2 software supports Windows 7-10 32/64 bit, Linux (Ubuntu/Kubuntu 18.04 x64), and macOS 10.14 Mojave and higher.

 

Architecture description

Block Diagram SunSDR2 QRP

 Basic configuration:

  • SunSDR2 QRP transceiver
  • LAN-cable (1.8m)
  • Power supply cable
  • RF Cable Mini UHF — HF (PL259) 1Ft (0.3m 1 pc.)

Additional accessories:

Write a review

Note: HTML is not translated!
Bad Good
Captcha
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email