Menu
Your Cart

Om Power OM4000A

Om Power OM4000A
Om Power OM4000A
Om Power OM4000A
Om Power OM4000A
Om Power OM4000A
Om Power OM4000A
Om Power OM4000A
Om Power OM4000A
Om Power OM4000A
Om Power OM4000A
Om Power OM4000A
Om Power OM4000A
Om Power OM4000A
6,700.02€
  • Stock: In Stock
  • Brand: OM-Power
  • Model: OM4000A
    Non in magazzino, verrà ordinato solo su richiesta, deposito cauzionale richiesto, tempi di consegna c
  • SKU: 636
  • EAN: 7438641845507
6224 views

General description and advantages of OM4000A amplifier

The model OM4000A is a auto power amplifier, designed for use on all amateur bands 1.8 -29.7 MHz (including WARC) and all modes.

It has two ceramic tetrode valves FU728F.

The advantages of OM4000A:

 

  • Automatic switching between bands
  • Automatic Tuning with Ribbon according to segments
  • Automatic transfer of band-pass filter
  • Automatic switching of antenna switch
  • The ability to use 2 different antenna within a band or segment
  • Full compatibility with
    • -I COME
    • -YAESU
    • -ELECRAFT
    • -Ten-Tec Orion
    • -Kenwood
    • -Icom transceiver protocol using microHAM output devices-CI-V (MK II, MK2R, MK2R +, etc)
    • -Flex Radio 6xxx series

 

OM4000A specification:

 

frequency coverage:Amateur bands 1.8-29.7 MHz including WARC
Output power:4000w on SSB and CW,
3000w RTTY, AM and FM
Power input:Usually from 60 to 90W for full output power
Input impedance:< 50 Ohm, VSWR 1.5:1
Power gain:17 dB
Output impedance:50 Ohm unbalanced
Maximum SWR output:2:1
SWR Protection:Automatic switching to STBY, energy when reflected is 350W or above
Intermodulation distortion:32 dB below rated power
Harmonic Suppression:< -50 DBc
pipes:2 x ceramic tetrode FU728F
Cooler:+ centrifugal fan axial fan
Power supply:2 x 230 V-50 Hz one or two phases
Transformers:3kVA toroidal transformer parts 2
Dimensions:485 x 200 x 455 mm (WxHxD)
Weight:46 kg
The protection circuits:-Too high VSWR
-Power input too high
-Output power is too high
-Plate Voltage too low
-Current anode too high
-Too high current screen
-Grid Current too high
-PA Mistuning
-Switching Protection Hot
-Soft start to protect the fuses
 -"Switch-on" to open amplifier
LED Indicators:-Current grid control (Ig1)-2 LEDS
-WAIT-(. 150 sec) tube preheating
-STBY-standby
-OPR-modes of operation
-Dead-bankruptcy, turning off for about. 2 sec.
-BLOCK-working state
-ANT 1-ANT is in use
-ANT 2-ANT is in use
-ANT-ANT selection
directions bar graph:-Power-LED 50
-Reflected power-20 LEDS
-Current Ig2-10 LED
-Anode voltage, anode current, tuning-30 LEDS

Write a review

Note: HTML is not translated!
Bad Good
Captcha
RM Italy BLA 350 300W Transistor Amplifier for HF
free shipping Coming soon
Unlike too many other 12V amplifiers, the BLA-350 is a stationary amplifier. It covers all 1.5 to 30MHz HF bands in all operating modes (SSB, CW, AM, ..
725.00€
HLA-300/V PLUS version with forced cooling fans NEW VERSION   HF amplifier for Yaesu FT-817 Linear amplif..
446.00€
Duplexer HF/2 m and 70 cm, for example, to use the antenna HV-7 with ICOM IC-706, FT-857 etc. Band: 1.6 -56/140-470MHzInsertion loss: 0.20, 3dBMax pow..
50.00€
Triplexer MX 2000N
Coming soon
Band: 1.6-60110-170300-950MHzInsertion loss: 0.150 .20, 25dBMax power 800W800W500WPEPIsolation: 60dBConnetor Antenna: Fem PL. MX-2000N PL maschioPL ma..
70.00€
The OM2500A linear amplifier is designed for all amateur bands from 1.8 up to 29 MHz (including WARC) and all modes.It is equipped with a ceramic te..
5,300.02€
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email