Your Cart

OM power OM2500A

OM power OM2500A
OM power OM2500A
OM power OM2500A
OM power OM2500A
OM power OM2500A
OM power OM2500A
OM power OM2500A
OM power OM2500A
OM power OM2500A
OM power OM2500A
OM power OM2500A
Shipping in 3/4 working days
Shipping times may vary based on certain conditions, for example if you are in a remote or uncomfortable place, times may vary.
Our strength? THE PRICE!
Unbeatable prices for goods always available and the best certified brands
  • Stock: In Stock
  • Brand: OM-Power
  • Model: OM2500A
    Non in magazzino, verrà ordinato solo su richiesta, deposito cauzionale richiesto, tempi di consegna c
  • SKU: 637
  • EAN: 7438641845514

The OM2500A linear amplifier is designed for all amateur bands from 1.8 up to 29 MHz (including WARC) and all modes.

It is equipped with a ceramic tetrode was-728F.

The advantages of OM2500A:

  • Automatic switching between bands
  • Automatic Tuning with Ribbon according to segments
  • Automatic transfer of band-pass filter
  • Automatic switching of antenna switch
  • The ability to use 2 different antenna within a band or segment
  • Full compatibility with
    • -I COME
    • -YAESU
    • -Ten-Tec Orion
    • -Kenwood
    • -Icom transceiver protocol using microHAM output devices-CI-V (MK II, MK2R, MK2R +, etc)
    • -Flex Radio 6xxx series

OM2500A specification:

frequency coverage:amateur bands 1.8-29.7 MHz including WARC
Output power:2500 W on SSB and CW
2000 W RTTY, AM and FM
Power driver:60 to 80 W for full output power
Input impedance:< 50 Ohm VSWR 1.5:1
output amplification:17 dB
output impedance:50 Ohm unbalanced
SWR maximum output:2:1
SWR Protection:automatic switching to STBY, energy when reflected is 350W or above
Intermodulation distortion:32 dB below rated output
Harmonic Suppression:< -50 DBc
Tube:Fu-728F ceramic tetrode
Cooler:centrifugal fan + axial fan
Power supply:2 x 230 V-50 Hz one or two phases
Transformers:toroidal transformer 2 pc 2.0 kVA
The protection circuits:-SWR too high
-Current anode too high
-Too high current screen
-Grid Current too high
-Mistuning of power amplifier
-Soft start to protect the fuses
-"Pass-on block" to open amplifier
directions bar graph:-Power-50 LED bar graph
-Reflected power-20 LED bar graph
-Current Panel (Ig2-10 LED bar graph)
-Anode voltage, anode current, tuning-30 LED bar graph
LED Indicators:-Grilled Current testing (Ig1-2 LED)
-WAIT-pipe preheating (180 sec)
-OPR-working state
-Dead-bankruptcy, turning off for about. 4 sec
-Inhibition-working state
-ANT 1-ANT is the use
-ANT 2-ANT is the use
 -UP-DWN-menu list
-MAN-manual operation
-AUTO-automatic operation
-ANT-ANT selection
parameters:485 x 200 x 455 mm (WxHxD)
Weight:40 kg

Write a review

Note: HTML is not translated!
Bad Good
HLA-300/V PLUS version with forced cooling fans NEW VERSION   HF amplifier for Yaesu FT-817 Linear amplif..
General description and advantages of OM4000A amplifierThe model OM4000A is a auto power amplifier, designed for use on all amateur bands 1.8 -29.7 ..
Om Power OM1000 +
Only to order
The OM1000 + linear amplifier is designed for all amateur band 1.8 to 29 MHz (including WARC bands) + 50 MHz and all modes.It is equipped with a c..
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.