Menu
Your Cart

LDG Z11 PROII automatic tuner

FEATURES

 

  • from 0.1 to 125 watt Chan power range (SSB and CW), 100W on 6 m
  • Easy to read LED display for SWR and status
  • 8000 3-D memories for instantaneous band switching
  • Tuning time: from 0.1 to 6 seconds full tune, 0.1 seconds for tuning by memory
  • User-selectable parameters: Auto/Semi, threshold, and many others
  • Coverage from 1.8 to 54.0 MHz. frequency Sensor built-in.
  • 6 receipts to 1000 Ω gives (from 16 to 150 on 6 m), 6 to 4000 Ωs with optional 4:1 balun
  • For dipoles, verticals, Vs, directives or/and coax fed antenna
  • The optional external Balun allows random length, long wire antennas agreement or ladder line
  • Power requirement: from 8 to 16 volts DC to 300 mA Max. 25 uA standby current
  • Container for batteries (not supplied)
  • Small box: 7.7 x 5.0 x 1.5. Weight: 1.5 pounds
  • CAUTION MANUAL IN GERMAN AND ENGLISH

 

Z-11Pro-II uses the network agree Switched-L microprocessor controlled state-of-the-art LDG. It grants dipoles, verticals, inverted-Vs or potentially any RG6. With an optional LDG balun, can also grant longwires or antennas type ladder-line.

Z-11Pro-II 8.000 memories in a unique array of LDG "3-D Memory", which automatically saves the configurations agreed for each frequency and bandwidth, for each of the 4 antennas. The sensor circuit of frequency allows the Z-11Pro-II from learning your operating band and how often. Whenever you transmit or are close to a frequency that you used previously, the Z-11Pro-II riaccorda from memory almost instantly (even in SSB!). Memories are stored indefinitely.

Easy-to-read led display the values of the SWR and status. Z-11Pro-II uses relays that maintain the configuration of the agreement even without power supply; the current in the absence of operaioni agree it is actually zero.

For maximum flexibility, the user can choose many battery options; internal or external. On the PC there are no welding in order to install a battery pack (not included). Then use 6 AAs and maintain many years of operation. If weight is an important factor (for the battery), then three lithium AAs will last at least a year. If all you need is a few months will suffice a single 9v battery.

The front control panel is very simple; Press the Tune button while you are transmitting, and Z-11Pro-II will start the cycle of agreement. Z-11Pro-II tag along! ' even while you're talking on AM or SSB. Although not included, are available precchie interfaces for Icom, Kenwood, Yaesu and Alinco transceivers. With the interface, the touch of a button activates the transmission of the carrier, the cycle of agreement and then reports the radio to its original situation.

Write a review

Note: HTML is not translated!
Bad Good
Captcha

LDG Tuner Tavola di comparazione

Tavola di comparazione LDG Tuner
Z-817Z-100+Z-11Pro2AT-897+RT-100RT-600YT-100IT-100YT-1200YT-847AT-100Pro2AT-200ProAT-600ProAT-1000Pro2
Freq. Range [MHz]1.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 54
Power 1.8 - 30MHz [W]0.1 - 200.1 - 1250.1 - 1250.1 - 1250.1 - 1256000.1 - 1251 - 1000.1 - 1005 - 2505 - 60020 - 1000
Potenza mass. 6m [W]2030100100100600100100100100100100250250
Antenna connectors1x PL1x PL1x PL1x PL1x PL1x PL1x PL1x PL1x PL1x PL2x PL2x PL2x PL2x PL
Tuning Range [Ω]6 - 6006 - 8006 - 10006 - 8004 - 8004 - 8004 - 8004 - 8004 - 10004 - 10006 - 10006 - 8006 - 8006 - 800
Number of Memories200020002000200020002000200020002000200040001600040004000
Internal Battery possibleSiSiSiNoNoNoNoNoNoNoNoNoNoNo
Ext. Supply Voltage [V]No8 - 188 - 18No (via CAT)No (via CAT)No (via CAT)No (via CAT)No (via CAT)No (via CAT)No (via CAT)11 - 1611 - 1611 - 1611 - 16
Current Draw after Tune0< 25µA< 25µA< 25µA< 8mA< 8mA< 8mA< 8mA< 8mA< 8mA< 8mA< 1A< 1A< 1A
On/Off SwitchNoNoNoNoNoNoNoNoNoNoNoSiSiSi
Latching relaysSiSiSiSiSiSiSiSiSiSiSiNoNoNo
Manual TuningSiSiSiSiSiSiSiSiSiSiSiSiSi
Automatic TuningNoNoSiNoNoNoNoNoNoNoSiSiSiSi
Manual Tuning of L & CNoNoNoNoNoNoNoNoNoNoSiSiSiSi
Display SWR1 LED1 LED3 LEDsNoNoNoNo1 LED1 LED1 LEDLED BarLED BarLED BarLED Bar
Display PowerNoNoNoNoNoNoNoNoNoNoLED BarLED BarLED BarLED Bar
Cable included1x LDG-Y-CAT1x DC1x DC1x LDG-Y-CAT--1x LDG-Y-CAT1x LDG-I-ACC1x LDG-IC4501x DC1x DC1x DC1x DC1x DC

 Potenza applicabile da 1 a 600 W ( P.E.P SSB e CW), 300 W continui in RTTY da 1.8 a 30 MHz. (NOTA:--->250 W P.E.P. in 6 metri)..
389.00€
The tuning operation is conveniently activated by pressing a button on the tuner, using the IT-100 through the "Tune" button of the radio. A..
180.00€
The tuning operation is conveniently activated by pressing a button on the tuner, using the IT-100 also via the "Tune" button on the radio. ..
229.00€
The LDG AT-100Pro2 and AT-200pro2 are tabletop tuners that cover the frequency range from 1.8 to 54 MHz, and mate automatically your antenna really qu..
259.00€
The LDG AT-100Pro2 and AT-200pro2 are tabletop tuners that cover the frequency range from 1.8 to 54 MHz, and mate automatically your antenna really qu..
329.00€
For the following wiresRG-58AIRCELL-7H-155..
0.01€
For the following wiresRG-58RG-213Ecoflex-10AIRCELL-7H-155..
0.01€
Vertical antenna vhf-uhf 144 Mhz and 430 Mhz     Special Features: • Fiberglass..
80.00€
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email