Menu
Your Cart

LDG IT 100 automatic tuner

LDG IT 100 automatic tuner
LDG IT 100 automatic tuner
182.00€
  • Stock: In Stock
  • Brand: LDG
  • Model: LDG IT-100
  • SKU: 50
  • EAN: 7438641839704
5747 views
Shipping in 7 working days COVID 19
Shipping times may vary based on certain conditions, for example if you are in a remote or uncomfortable place, times may vary.
Our strength? THE PRICE!
Unbeatable prices for goods always available and the best certified brands

The tuning operation is conveniently activated by pressing a button on the tuner, using the IT-100 through the "Tune" button of the radio. A longer pressure triggers a new round of tuning, a touch short enable "bypass". Thanks to 2000 memories, the tuner is the frequencies in a very fast, for frequencies not stored, the tuner itself less than 6 seconds. The tuner fits a ROS from 10:1 (3:1 on 6 m) and therefore has a much wider range than similar models. Duel LEDs indicate the conditions of "ROS too high" and the active tuning cycle.

Both devices are connected to CAT connector or radio tuner with the supplied cable (length 35 cm), which will also provide power. Interconnessini are thus reduced to an absolute minimum. Also provides the coax (long 35 cm) to connect your tuner on the radio.

 

IT-100 is the successor to the tuner AT-7000, which is no longer available. It not only supports the IC-7000, but all ICOM radios with the 4-pin connector for tuner (eg: IC-706Mk2G, IC-718, IC-746, IC-7400, IC-756Pro3 etc.). The size of the tuner are 17x17x4cm, the weight is 750 g.

Further technical details:

  • Operating range from 1.8 to 54.0 MHz
  • from 0.1 to 125 Watts (SSB and CW), 100W on 6 m
  • Time of agreement from 0.1 to 6 seconds for new frequencies, about 0.1 sec If attendance is already in memory
  • Grants from 4 to 800 Ω (from 16 to 150 Ohm on 6 m), from 4 to 4:1 balun 3200 Ω with the optional
  • Granting all kinds of antenna fed by coaxial cable: dipoles, verticals, directives, etc.
  • The optional balun grant random long wires, wires or antennas twin ladder
  • Control cable

CAUTION MANUAL IN GERMAN AND ENGLISH

 

     

    Write a review

    Note: HTML is not translated!
    Bad Good
    Captcha

    LDG Tuner Tavola di comparazione

    Tavola di comparazione LDG Tuner
    Z-817Z-100+Z-11Pro2AT-897+RT-100RT-600YT-100IT-100YT-1200YT-847AT-100Pro2AT-200ProAT-600ProAT-1000Pro2
    Freq. Range [MHz]1.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 54
    Power 1.8 - 30MHz [W]0.1 - 200.1 - 1250.1 - 1250.1 - 1250.1 - 1256000.1 - 1251 - 1000.1 - 1005 - 2505 - 60020 - 1000
    Potenza mass. 6m [W]2030100100100600100100100100100100250250
    Antenna connectors1x PL1x PL1x PL1x PL1x PL1x PL1x PL1x PL1x PL1x PL2x PL2x PL2x PL2x PL
    Tuning Range [Ω]6 - 6006 - 8006 - 10006 - 8004 - 8004 - 8004 - 8004 - 8004 - 10004 - 10006 - 10006 - 8006 - 8006 - 800
    Number of Memories200020002000200020002000200020002000200040001600040004000
    Internal Battery possibleSiSiSiNoNoNoNoNoNoNoNoNoNoNo
    Ext. Supply Voltage [V]No8 - 188 - 18No (via CAT)No (via CAT)No (via CAT)No (via CAT)No (via CAT)No (via CAT)No (via CAT)11 - 1611 - 1611 - 1611 - 16
    Current Draw after Tune0< 25µA< 25µA< 25µA< 8mA< 8mA< 8mA< 8mA< 8mA< 8mA< 8mA< 1A< 1A< 1A
    On/Off SwitchNoNoNoNoNoNoNoNoNoNoNoSiSiSi
    Latching relaysSiSiSiSiSiSiSiSiSiSiSiNoNoNo
    Manual TuningSiSiSiSiSiSiSiSiSiSiSiSiSi
    Automatic TuningNoNoSiNoNoNoNoNoNoNoSiSiSiSi
    Manual Tuning of L & CNoNoNoNoNoNoNoNoNoNoSiSiSiSi
    Display SWR1 LED1 LED3 LEDsNoNoNoNo1 LED1 LED1 LEDLED BarLED BarLED BarLED Bar
    Display PowerNoNoNoNoNoNoNoNoNoNoLED BarLED BarLED BarLED Bar
    Cable included1x LDG-Y-CAT1x DC1x DC1x LDG-Y-CAT--1x LDG-Y-CAT1x LDG-I-ACC1x LDG-IC4501x DC1x DC1x DC1x DC1x DC

    The tuning operation is conveniently activated by pressing a button on the tuner, using the IT-100 also via the "Tune" button on the radio. ..
    202.00€
    The LDG AT-100Pro2 and AT-200pro2 are tabletop tuners that cover the frequency range from 1.8 to 54 MHz, and mate automatically your antenna really qu..
    229.00€
    The LDG AT-100Pro2 and AT-200pro2 are tabletop tuners that cover the frequency range from 1.8 to 54 MHz, and mate automatically your antenna really qu..
    259.00€
    FEATURES from 0.1 to 125 watt Chan power range (SSB and CW), 100W on 6 m Easy to read LED display for SWR and status 8000 3-D memories ..
    189.00€
    Connectors for the control cables for the Yaesu rotators
    Top Brand
    Set of connectors for Yaesu 25M-WP for Yaesu rotators. A 6 pin square connector to the control unit, a 7 pin round connector with rubber cap for rotor..
    36.03€
    ICOM IC-7100HF/VHF/UHF ALL MODE TRANSCEIVERIntuitive interface with touch screen With the touch screen it has an innovative, rapid and faci..
    1,099.00€
    Automatic antenna tuner for powers up to 1000W! Microprocessor controlled, analyzes the SWR, and a network to L gives so much faster than any other ma..
    569.00€
    We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

    The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

    Name
    Email