Menu
Your Cart

LDG Balun

LDG Balun
LDG Balun
LDG Balun
Free
LDG Balun
LDG Balun
LDG Balun
LDG Balun
0.00€
  • Stock: In Stock
  • Brand: LDG
  • Model: 11366
  • SKU: 884
  • EAN: 7438641847952
1151 views

Available Options

Baluns by LDG, suitable for use with LDG or stand alone tuners. Max. Power load 200 W, one side has a PL socket, the other side two terminals for connecting to wires or lines to scale (double cable). The baluns are made for outdoor use, for permanent outdoor installation they must be waterproofed with an additional silicone gasket on the back of the housing.
The 4: 1 balun is a voltage-type balun and is typically used for long-wire antennas (length> lambda / 2), but also for Windom and other dipole antennas. Usually the balun is placed directly on the antenna, not inside the tuner. The 1: 1 model is a current balun that also acts as an HF inductance. It is generally used as a transition from the coaxial cable to the scale line.
The Unun 4: 1 is typically used with very long, high-impedance antennas and loops, usually to be used with a tuner. Weight approx. 170 g, dimensions 128 x 64 x 32 mm, 200 W max.

Write a review

Note: HTML is not translated!
Bad Good
Captcha

LDG Tuner Tavola di comparazione

Tavola di comparazione LDG Tuner
Z-817Z-100+Z-11Pro2AT-897+RT-100RT-600YT-100IT-100YT-1200YT-847AT-100Pro2AT-200ProAT-600ProAT-1000Pro2
Freq. Range [MHz]1.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 54
Power 1.8 - 30MHz [W]0.1 - 200.1 - 1250.1 - 1250.1 - 1250.1 - 1256000.1 - 1251 - 1000.1 - 1005 - 2505 - 60020 - 1000
Potenza mass. 6m [W]2030100100100600100100100100100100250250
Antenna connectors1x PL1x PL1x PL1x PL1x PL1x PL1x PL1x PL1x PL1x PL2x PL2x PL2x PL2x PL
Tuning Range [Ω]6 - 6006 - 8006 - 10006 - 8004 - 8004 - 8004 - 8004 - 8004 - 10004 - 10006 - 10006 - 8006 - 8006 - 800
Number of Memories200020002000200020002000200020002000200040001600040004000
Internal Battery possibleSiSiSiNoNoNoNoNoNoNoNoNoNoNo
Ext. Supply Voltage [V]No8 - 188 - 18No (via CAT)No (via CAT)No (via CAT)No (via CAT)No (via CAT)No (via CAT)No (via CAT)11 - 1611 - 1611 - 1611 - 16
Current Draw after Tune0< 25µA< 25µA< 25µA< 8mA< 8mA< 8mA< 8mA< 8mA< 8mA< 8mA< 1A< 1A< 1A
On/Off SwitchNoNoNoNoNoNoNoNoNoNoNoSiSiSi
Latching relaysSiSiSiSiSiSiSiSiSiSiSiNoNoNo
Manual TuningSiSiSiSiSiSiSiSiSiSiSiSiSi
Automatic TuningNoNoSiNoNoNoNoNoNoNoSiSiSiSi
Manual Tuning of L & CNoNoNoNoNoNoNoNoNoNoSiSiSiSi
Display SWR1 LED1 LED3 LEDsNoNoNoNo1 LED1 LED1 LEDLED BarLED BarLED BarLED Bar
Display PowerNoNoNoNoNoNoNoNoNoNoLED BarLED BarLED BarLED Bar
Cable included1x LDG-Y-CAT1x DC1x DC1x LDG-Y-CAT--1x LDG-Y-CAT1x LDG-I-ACC1x LDG-IC4501x DC1x DC1x DC1x DC1x DC

Tags: LDG Balun , balun
L' RT-100 MK2 is a tuner remote coaxial from 100 Watts designed to be placed in the vicinity of the antenna feed point. Se are you concerned ab..
255.00€
Eantenna builds wire antennas which consist of several individual dipoles on a single Balun. This means that you only need one coax cable for feeding ..
112.00€
The new micro KEYER III ™ is the first and only USB interface for high dynamic range amateur radio that uses a processing chain, in all phases o..
385.00€
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email