Menu
Your Cart

LDG AT 100pro2 automatic tuner

LDG AT 100pro2 automatic tuner
LDG AT 100pro2 automatic tuner
LDG AT 100pro2 automatic tuner
LDG AT 100pro2 automatic tuner
LDG AT 100pro2 automatic tuner
259.00€
  • Stock: In Stock
  • Brand: LDG
  • Model: LDG AT-100pro2
  • SKU: 98
  • EAN: 7438641840175
5729 views

The LDG AT-100Pro2 and AT-200pro2 are tabletop tuners that cover the frequency range from 1.8 to 54 MHz, and mate automatically your antenna really quickly. They have a two-position antenna switch, allowing the instantaneous switching of two antennas. Ta-100Pro2 requires just 1 watt in order to operate the tuning (5W to Ta-200pro2) but handles up to 125 watts, making it suitable for everything from QRP up to typical transceiver to be 100 Watts. Ta-200pro2 supports up to 200W on HF, 6 m, the lowest power 100W max. of deal is 5W.
Each tuner has up to 2.000 MHz for each antenna, automatically storing the configurations for each frequency and bandwidth. The circuit of frequency sensors allows the AT-100Pro2/AT-200pro2 to know your operating frequency. Whenever you transmit or you'll be near the frequency already used previously, the tuner will perform the agreement almost instantly: the deal is about 0.2 sec for memories, from 0.5 to 6 seconds for the entire cycle on new frequencies are not stored.

Easy to read LED bar graphs show the SWR and power, and a button on the front panel allows you to access data like how and status.
The tuners grant dipoles, verticals, inverted-Vs and potentially any coaxial antenna. With an optional balun, you can also tune the longwires or antennas to ladder-line. 6 to 1000 Ω impedance grants (from 16 to 150 on 6 m), 6 to 4000 Ω with the optional balun 4.1.
Control from the front panel is simple and direct; Press Tune while beam, and the tuner will start a cycle of agreement. For an even more integrated operation there are cables for Icom transceivers. With a single press of the button will transmit the carrier, will perform a full cycle of agreement and bring her to the radio in the initial conditions.
Power requirement: from 11 to 16 volts DC at 500 mA max, size: 19 x 14 x 5 cm AT-100pro2. At-200pro2:22 x 15.5 x 5 cm, weight: 0.8 Kg.

CAUTION MANUAL IN GERMAN AND ENGLISH

Write a review

Note: HTML is not translated!
Bad Good
Captcha

LDG Tuner Tavola di comparazione

Tavola di comparazione LDG Tuner
Z-817Z-100+Z-11Pro2AT-897+RT-100RT-600YT-100IT-100YT-1200YT-847AT-100Pro2AT-200ProAT-600ProAT-1000Pro2
Freq. Range [MHz]1.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 541.8 - 54
Power 1.8 - 30MHz [W]0.1 - 200.1 - 1250.1 - 1250.1 - 1250.1 - 1256000.1 - 1251 - 1000.1 - 1005 - 2505 - 60020 - 1000
Potenza mass. 6m [W]2030100100100600100100100100100100250250
Antenna connectors1x PL1x PL1x PL1x PL1x PL1x PL1x PL1x PL1x PL1x PL2x PL2x PL2x PL2x PL
Tuning Range [Ω]6 - 6006 - 8006 - 10006 - 8004 - 8004 - 8004 - 8004 - 8004 - 10004 - 10006 - 10006 - 8006 - 8006 - 800
Number of Memories200020002000200020002000200020002000200040001600040004000
Internal Battery possibleSiSiSiNoNoNoNoNoNoNoNoNoNoNo
Ext. Supply Voltage [V]No8 - 188 - 18No (via CAT)No (via CAT)No (via CAT)No (via CAT)No (via CAT)No (via CAT)No (via CAT)11 - 1611 - 1611 - 1611 - 16
Current Draw after Tune0< 25µA< 25µA< 25µA< 8mA< 8mA< 8mA< 8mA< 8mA< 8mA< 8mA< 1A< 1A< 1A
On/Off SwitchNoNoNoNoNoNoNoNoNoNoNoSiSiSi
Latching relaysSiSiSiSiSiSiSiSiSiSiSiNoNoNo
Manual TuningSiSiSiSiSiSiSiSiSiSiSiSiSi
Automatic TuningNoNoSiNoNoNoNoNoNoNoSiSiSiSi
Manual Tuning of L & CNoNoNoNoNoNoNoNoNoNoSiSiSiSi
Display SWR1 LED1 LED3 LEDsNoNoNoNo1 LED1 LED1 LEDLED BarLED BarLED BarLED Bar
Display PowerNoNoNoNoNoNoNoNoNoNoLED BarLED BarLED BarLED Bar
Cable included1x LDG-Y-CAT1x DC1x DC1x LDG-Y-CAT--1x LDG-Y-CAT1x LDG-I-ACC1x LDG-IC4501x DC1x DC1x DC1x DC1x DC

The tuning operation is conveniently activated by pressing a button on the tuner, using the IT-100 through the "Tune" button of the radio. A..
180.00€
The tuning operation is conveniently activated by pressing a button on the tuner, using the IT-100 also via the "Tune" button on the radio. ..
229.00€
The LDG AT-100Pro2 and AT-200pro2 are tabletop tuners that cover the frequency range from 1.8 to 54 MHz, and mate automatically your antenna really qu..
329.00€
Automatic antenna tuner for powers up to 1000W! Microprocessor controlled, analyzes the SWR, and a network to L gives so much faster than any other ma..
579.00€
FEATURES from 0.1 to 125 watt Chan power range (SSB and CW), 100W on 6 m Easy to read LED display for SWR and status 8000 3-D memories ..
199.00€
Description:Y-ACC. 14" cable interface between select Yaesu radios and LDG Generic tuners. Does not supply DC to tuner.Radios:FT-857, FT-897, FT-100 s..
11.40€
AT 100proII, AT 200proII, AT 600proII, AT 1000proII,  Z 100PLUS, Z11 proIIDescription:The IC-PAC and IC-PAC-6 interface cables providing DC power..
14.00€
ACOM 600S HF linear amplifier
Top Brand Out of production
OUT OF PRODUCTIONONLY ON RESERVATION TIME WAITING 30 DAYSThe ACOM 600S UI, Solid State Amplifier for HF• high resolution color display .5 "(10..
2,482.01€
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email