statistiche siti web
Menu
Your Cart


RM ITALY 250V Amplifier for 2 m

RM ITALY 250V Amplifier for 2 m
RM ITALY 250V Amplifier for 2 m
RM ITALY 250V Amplifier for 2 m
RM ITALY 250V Amplifier for 2 m
RM ITALY 250V Amplifier for 2 m
  • Product: Available
  • Brand: RM Italy
  • Model: LA-250V
  • SKU: 319
  • EAN: 7438641842346
550.22€

Pay with: Bank Transfer, PostePay Top-up, Credit Card

or by installments with Pagantis

         

Shipping in 3/7 working days due to COVID 19

Shipping times may vary based on some conditions, for example if you are in a remote or uncomfortable place, times may vary.

The LA-250V 200W amplifier, 140-150 MHz is 1 to 20 w input (13.6 V 30A). It uses Mitsubishi 4 A50 Mosfet mounted on a copper heat spreader (200x60x3mm). It is available in two versions, one with and one without a top mounted fan. There is an external input PTT but can also be used without cause embedded HF-VOX.

The front panel features an LCD display that shows input power, output power, heatsink temperature and output VSWR. There is a possibility to change the intensity of the backlight. The CPU keeps an eye on input power, temperature and ROS and will eventually turn off the amplifier to be transmitted in case of failure. Any errors will be recorded and will be available for the recall after being diagnosed by the manufacturer or its distributors. The weight is about 4 kg.

The dimensions are approximately 240x420x70mm for the non-fan and 10 mm in more than 80 mm height, for version fan.

  LA-250V
Frequency range 140-150 MHz
Supply voltage 13.5 V
Power consumption Max. 30 to
Input power 1-20 W
Output power type. 200 W
Fans No Yes, 2 x
RX pre amplifier switchable, 10-25dB
Fuses 2 x 12A internally
Size 420 x 240 x 70 mm 420 x 240 x 80 mm
Weight 4.0 kg
Connections 2 x PL socket, Cinch (PTT), DC cable

The LA-250 is a 140-150 MHz 200W amplifier, at 1 to 20W input (13.6 V 30A). It uses Mitsubishi 4 A50 Mosfets mounted on a copper heat spreader (200x60x3mm). It is available in two versions one with and one without top mounted fans. There is an external PTT input but it can be used also without due to the built-in HF-VOX.

The front panel features an LC Display which shows input power, output power, heat sink temp and output VSWR. There is the ability to change the intensity of the backlight. The CPU keeps an eye on input power, temperature and VSWR and will if necessary disable the amplifier from transmitting if there is fault. Any errors will also be recorded and will be available for later recall for diagnostic purposes by either the manufacturer or his distributors. Weight is approximately 4 kg.

Dimensions are approximately 240x420x70mm for the non-fan version and an extra 10 mm of height, 80 mm, for the fan version.

Write a review

Note: HTML is not translated!
Bad Good
Captcha
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email