Palstar AT 4 k manual tuner from 4kw
If you really want to get a lot of power to antenna, then the Palstar AT-4 k is the right tuner. This is the tuner Palstar became well known for and it has since been continuously improved. The tuner has a max. 3000W power PEP (2500W CW) (actual loads). High quality components are designed for long life, because both variable capacitors are specified for 6 kV, the roller inductor and go up to max. HF power 10A. The use of three controls on t-matching (2 x variable capacitors, inductors roller 1 x) enables very precise and fine tuning.
Also the Palstar AT-4 k has a balun 1:1 switchable tuner input. Wire antennas or open wire end-Fed in this manner can be tuned directly. The balun is switched by a relay front panel. As with all great tuners from Palstar, Ta-4 k has a large cross-needle with backlight. Passage range from 300 to 3000W provides instant overview of back and forth power as well as the resulting SWR. The instrument has a "Peak and Hold ' function to read the peak values are more accurate and easier. Power requires 12V, max. 200ma.
When you really want to get a lot of power to the antenna, then the Palstar AT-4 k is the right tuner. This is the tuner Palstar has become well-known for and it has ever since been continuously improved. The tuner has a max power rating of 3000 w PEP (2500W CW) (real loads). The high-quality components are designed for long durability, as both variable capacitors are specified for 6kV, the roller inductor and switch up to max 10A HF power. The use of three controls in t-matching (2 x variable capacitors, 1 x roller inductor) makes very precise and fine tuning possible.
Additionally the Palstar AT-4 k has a switchable 1:1 balun at the input of the tuner. This way end-fed wire or open wire antennas can be tuned directly. The balun is switched on by a front panel relay. As with all large tuners from Palstar, the AT-4 k has a large cross-needle display with backlighting. Switching meter range from 300 to 3000W provides instant overview of forward and reverse power as well as the resulting SWR. The meter has a ' Peak and Hold ' function to read peak values more accurate and easier. Power supply requires 12V, max 200mA.
Specifications Palstar AT-4 Tuner Output power: Max. 3000w PEP (2500 CW) HF Bands: 10 m-160 m Tuning: 2 variable capacitors, 1 roller inductor, t-matching Antenna switching: 2 antennas, bypass, optional balun Capacitors: 2 x max. 460pF @ 6 kV Roller inductor: 10 A, silver-plated inductor wheel shaft and contact wheel on ceramic body Impedance: 20 — 1500 Ω Meter: Active cross-needle (Peak/Peak Hold) with backlighting Meter power range 0-300/0-3000 Watts Balun: 1:1, shiftable Output: Unbalanced/balanced activated by front panel switch Power supply: 13.8 V DC, 200 Ma max. Chassis: Aluminium, hot dip galvanised of powder coated Size: 384mm x 193mm x 483mm Weight: 9, 0kg
- Included in delivery of Palstar Tuner ' AT-4 k's
- DC cable
- Manual English
Only the coax cable is needed to connect radio and tuner! No other connections necessary.