Menu
Your Cart

Due to the volume of orders, delivery times may be longer

OM Power OM2000A - hf linear amplifier and 50 mhz

OM Power OM2000A - hf linear amplifier and 50 mhz
OM Power OM2000A - hf linear amplifier and 50 mhz
OM Power OM2000A - hf linear amplifier and 50 mhz
ON ORDER
OM Power OM2000A - hf linear amplifier and 50 mhz
OM Power OM2000A - hf linear amplifier and 50 mhz
OM Power OM2000A - hf linear amplifier and 50 mhz
OM Power OM2000A - hf linear amplifier and 50 mhz

Waiting times between 5 and 10 working days

  • Product: In Stock
  • Brand: OM-Power
  • Model: OM2000A
  • SKU: 668
  • EAN: 7438641845828
4,800.00€

Pay with: Bank Transfer, PostePay Top-up, Credit Card

or by installments with Pagantis

         

Shipping in 4/7 working days due to COVID 19

Shipping times may vary based on some conditions, for example if you are in a remote or uncomfortable place, times may vary.

OM Power OM2000A - hf linear amplifier and 50 mhz

The automatic linear amplifier OM2000A+ is designed for all short wave amateur bands from 1.8 to 29 MHz (including WARC – bands) + 50 MHz and all modes. It is equipped with a ceramic tetrode FU-728F.
 

Specification of OM2000A+:

Frequency coverage: Amateur bands 1.8 – 29.7 MHz including WARC + 50 MHz
Power output: 2000+ W in SSB/CW on HF bands, 1500 W in RTTY
1500 W CW/SSB on 50 MHz
Drive power: 40 to 60 W for full output power
Input impedance: 50 Ohm VSWR < 1.5 : 1
Output amplification: 17 dB
Output impedance: 50 Ohm unbalanced
Maximum output SWR: 3:1
SWR protection: Automatic switching to STBY when reflected power is 350W or higher
Intermodulation distortion: better then -32 dBc
Suppression of harmonics: min -50 dBc (30–54 MHz better than -70dBc)
Response speed of AUTO tune: less than 0,5s within same BAND ,less than 3s if out of BAND
Supported TRXs-CAT: ICOM, ELECRAFT, KENWOOD, TEN-TEC ORION, YEASU,
Icom transceive protocol using by microHAM devices – CI-V OUPUT,
Flex Radios and Anan ( Apache Labs )
Tube: FU-728F ceramic tetrode
Cooling: Centrifugal blower + axial blower
Power supply: Switchable 220,230,240V – 50/60 Hz or other primary voltages
(for example 200V 50/60Hz for Japan)
Transformers: 1 toroidal transformer 3.0 kVA
Protection circuits: - SWR too high
  - Anode current too high
  - Screen current too high
  - Grid current too high
  - Mistuning of power amplifier
  - Temperature to high
  - Soft start for fuse protection
  - “switch –on blocking “ at opened amplifier
Indications: 4.3" colour touch screen display
Features: - Support automatic external Antenna switching
  - Memory for faults and warning, easy maintenance
  - Automatic set-up anode current (BIAS) – no need to manual adjust after changing the tube
  - Automatic set-up of blower speed according to temperature
  - T/R System: QSK operation with built-in vacuum RF antenna relay
  - Remote control - connector for LAN connection
  - The smallest and lightest 2000 W automatic PA on the market
Mechanical parameters: 390mm x 195mm x 370mm (width x height x depth)
Weight: 24 kg

Write a review

Note: HTML is not translated!
Bad Good
Captcha
VERTICAL OMNIDIRECTIONAL ANTENNA 144/430 MHz HEIGHT 7.20 M. TECHNICAL CHARACTERISTICS Working range: 144-430 MHz Configuration: 4 x 5/8 λ (14..
269.11€
The LA-1K is a RF Dual HF Sensing LDMOS 1000 Watt Amplifier. While the LA-1K will be working with a wide variety of tuners and transceivers, Palstar&#..
3,801.52€
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email