The OM-Power Amplifier OM2000 + works from 1.8-29 MHz, including WARC bands. The amplifier also works on 50 MHz. A ceramic tetrode FU-728F ensures a stable power up to 2000W.
The 3 outputs OM2000 + antenna, which can easily be switched from the front panel. The operating parameters are displayed on an OLED display with 4x20 characters. In addition, one meter needle cross analog for the direct and reflected power is installed power.
In addition, several LEDs indicate the operating status at a glance. For easy adjustment of the operating frequency, there is a TUNE-indicator, indicating correct tuning.
Protective circuits prevent damage OM2000 + case of incorrect operation. Critical parameters such as SWR too high, too high a grid or anode current, maladjustment, etc are constantly monitored. If an error occurs, the PA will switch to standby mode.
A temperature-controlled fan ensures sufficient cooling of the tetrode was-728F. If the hose must be replaced, the voltage automatically calibrates. A complicated cutting is not necessary.
The OM2000 + is in this class with only 24kg, the amp light tube from commercial production. In addition, the OM2000 + works on 6 m with full power.