LDG Z11 PROII automatic tuner
- from 0.1 to 125 watt Chan power range (SSB and CW), 100W on 6 m
- Easy to read LED display for SWR and status
- 8000 3-D memories for instantaneous band switching
- Tuning time: from 0.1 to 6 seconds full tune, 0.1 seconds for tuning by memory
- User-selectable parameters: Auto/Semi, threshold, and many others
- Coverage from 1.8 to 54.0 MHz. frequency Sensor built-in.
- 6 receipts to 1000 Ω gives (from 16 to 150 on 6 m), 6 to 4000 Ωs with optional 4:1 balun
- For dipoles, verticals, Vs, directives or/and coax fed antenna
- The optional external Balun allows random length, long wire antennas agreement or ladder line
- Power requirement: from 8 to 16 volts DC to 300 mA Max. 25 uA standby current
- Container for batteries (not supplied)
- Small box: 7.7 x 5.0 x 1.5. Weight: 1.5 pounds
- CAUTION MANUAL IN GERMAN AND ENGLISH
Z-11Pro-II uses the network agree Switched-L microprocessor controlled state-of-the-art LDG. It grants dipoles, verticals, inverted-Vs or potentially any RG6. With an optional LDG balun, can also grant longwires or antennas type ladder-line.
Z-11Pro-II 8.000 memories in a unique array of LDG "3-D Memory", which automatically saves the configurations agreed for each frequency and bandwidth, for each of the 4 antennas. The sensor circuit of frequency allows the Z-11Pro-II from learning your operating band and how often. Whenever you transmit or are close to a frequency that you used previously, the Z-11Pro-II riaccorda from memory almost instantly (even in SSB!). Memories are stored indefinitely.
Easy-to-read led display the values of the SWR and status. Z-11Pro-II uses relays that maintain the configuration of the agreement even without power supply; the current in the absence of operaioni agree it is actually zero.
For maximum flexibility, the user can choose many battery options; internal or external. On the PC there are no welding in order to install a battery pack (not included). Then use 6 AAs and maintain many years of operation. If weight is an important factor (for the battery), then three lithium AAs will last at least a year. If all you need is a few months will suffice a single 9v battery.
The front control panel is very simple; Press the Tune button while you are transmitting, and Z-11Pro-II will start the cycle of agreement. Z-11Pro-II tag along! ' even while you're talking on AM or SSB. Although not included, are available precchie interfaces for Icom, Kenwood, Yaesu and Alinco transceivers. With the interface, the touch of a button activates the transmission of the carrier, the cycle of agreement and then reports the radio to its original situation.
LDG Tuner Tavola di comparazione
|Freq. Range [MHz]||1.8 - 54||1.8 - 54||1.8 - 54||1.8 - 54||1.8 - 54||1.8 - 54||1.8 - 54||1.8 - 54||1.8 - 54||1.8 - 54||1.8 - 54||1.8 - 54||1.8 - 54||1.8 - 54|
|Power 1.8 - 30MHz [W]||0.1 - 20||0.1 - 125||0.1 - 125||0.1 - 125||0.1 - 125||600||0.1 - 125||1 - 100||0.1 - 100||5 - 250||5 - 600||20 - 1000|
|Potenza mass. 6m [W]||20||30||100||100||100||600||100||100||100||100||100||100||250||250|
|Antenna connectors||1x PL||1x PL||1x PL||1x PL||1x PL||1x PL||1x PL||1x PL||1x PL||1x PL||2x PL||2x PL||2x PL||2x PL|
|Tuning Range [Ω]||6 - 600||6 - 800||6 - 1000||6 - 800||4 - 800||4 - 800||4 - 800||4 - 800||4 - 1000||4 - 1000||6 - 1000||6 - 800||6 - 800||6 - 800|
|Number of Memories||2000||2000||2000||2000||2000||2000||2000||2000||2000||2000||4000||16000||4000||4000|
|Internal Battery possible||Si||Si||Si||No||No||No||No||No||No||No||No||No||No||No|
|Ext. Supply Voltage [V]||No||8 - 18||8 - 18||No (via CAT)||No (via CAT)||No (via CAT)||No (via CAT)||No (via CAT)||No (via CAT)||No (via CAT)||11 - 16||11 - 16||11 - 16||11 - 16|
|Current Draw after Tune||0||< 25µA||< 25µA||< 25µA||< 8mA||< 8mA||< 8mA||< 8mA||< 8mA||< 8mA||< 8mA||< 1A||< 1A||< 1A|
|Manual Tuning of L & C||No||No||No||No||No||No||No||No||No||No||Si||Si||Si||Si|
|Display SWR||1 LED||1 LED||3 LEDs||No||No||No||No||1 LED||1 LED||1 LED||LED Bar||LED Bar||LED Bar||LED Bar|
|Display Power||No||No||No||No||No||No||No||No||No||No||LED Bar||LED Bar||LED Bar||LED Bar|
|Cable included||1x LDG-Y-CAT||1x DC||1x DC||1x LDG-Y-CAT||-||-||1x LDG-Y-CAT||1x LDG-I-ACC||1x LDG-IC450||1x DC||1x DC||1x DC||1x DC||1x DC|