statistiche siti web
Your Cart


  • Product: Available
  • Brand: ELAD
  • Model: FDM-DUO
  • SKU: 441
  • EAN: 7438641843565
Ex Tax: 901.64€

Shipping in 3/7 working days due to COVID 19

Shipping times may vary based on some conditions, for example if you are in a remote or uncomfortable place, times may vary.

FDM-DUO is a DSP transceiver that offers the possibility to operate stand-alone as traditional radio or connected to a personal computer to discover the opportunities offered by technologies SDR.

Stand-alone due June 6, 2014 specifications


Freqency range: 10 kHz-54MHz

122.88 MHz ADC sampling receiver direct 16-bit LTC2165: @ operating

DDC (Digital Down Converter) family of Xilinx FPGA Spartan, 6 up to 192Ksps

DDC, filter and demodulator floating ARM STM32F429 microcontroller

USB, LSB, CW, AM Demodulation

LSB, USB 1600-selectable filters with more than 4000-5000 Bandwitdh 3100Hz 100 Hz-6000 Hz Bandwitch

Am filter selectable from 2500 to 6000Hz with step 500Hz

2600Hz-1000-1500-500 Filters CW-300-100 Hz Bw 100 Hz 4 peak filters applied after most Cw Bw Bw 20 Hz to obtain a total filtration

10 noise reduction levels

Noise Blanker 10 leves

VFO A VFO B, 199 memoirs with alphanumeric frequency/label display, programmable from memory manager FDM-SW2

Programmable BAND selections: quick recall memories up to 20 selectable 180-199


AD9957 368.64 MHz DDS clock

@ 48 kHz 16 bit ADC microphone input selectable gain-12dB to + 12dB

Key inputs and Paddleball for CW operation (Iambic A and B Iambic selectable)

Output power 5W minutes from 160 m to 6 m, output 8 W tip @ 14MHz

PTT output to drive external amplifiers


All programmable components (ARM RX, TX, FPGA, ARM Flash microcontroller user interface and USB controller) firmware update

USB control interface with FTDI regulator input CH

SO-239 antenna connector: SO-239, RTX RX

Monitor output: 0dBm SMA to use as test equipment allow use as digital RF generator

Backlit LCD programmable RGB, depending on the function can change the color (RX, TX, PC remote control)

10 MHz Reference input connector: SMA

Power supply: 13.8 VDC 500mA 2.1 mm DC plug consumption RX tip (13.8 V) TX: tbd

Size: 180 mm Witdh (7.00 ") x depth 155 mm (6.10"), including the knob and connectors or 130 mm (5.10 ") only 70 mm height x container (2.75")

Weight: 1.2 Kg (2.4 lbs) 2.2 Kg (4.85 lbs) shipping package

PC mode operation with software specifications FDM-SW2 updated 6 JUNE 2014

Up to 9 simultaneous combination receivers (stand-alone 1 on center frequency, 192 kHz channel FDM-SW2 4 fist and 192 kHz channel 4 during the second

Each receiver FDM-SW2 have an audio channel devoted and dedicated a CAT to be usable from external applications with serial ports Visrtual and virtual audio cables

192 kHz selectable configuration DDC bandwidth 6 MHz bandwidth (192.384 .3072, 6144Ksps .768 .1546) 2 channels 2 channels 192Ksps, 384Ksps

RX and TX SPLIT mode operation: VFO A VFO B used to while RX TX (with FDM-SW2 operation simple click to change the frequency TX)

Integration Manager CW skimmer (DX Spot view and sync capability)

Direct digital modulation sound card via USB digital CMedia chipset based interfaced with floating ARM microcontroller and DDS


Frequency range RX9 kHz-52 MHz RX direct sampling
Frequency range Txonly amateur bands 160 to 6 m
Output power5W on amateur bands or 0 dBm HF-Output
Connectors2 x antenna jacks PL (RX/TX or separate RX/TX)
Exciter Output0dbm, 100 kHz-54 MHz
Frequency OscillatorTCXO 10 MHz
Frequency stabilityFIXME
Stand-alone modes (w/o PC)USB, LSB, CW, AM, FM
CATUSB interface with FTDI controller
Weight1200 g
Size incl. controls180 × 155 × 70 mm

Write a review

Note: HTML is not translated!
Bad Good
Tags: Elad FDM DUO , SDR
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.