120 watt amplifier for HF and 50MHz. Includes power supply, preselectors and remote control of the FDM-DUO.
100W @ 50MHz
5W for nominal output, 10W Max
160m - 6m
Main power supply
110 / 230Vac
Output power 1
YES (maximum 2A)
Output Antenna Connectors (SO-239)
Incoming antennas connectors (SO-239)
1RTX or 1RX / 1TX
Input attenuators 2
2, 3 or 5 dB
Preselection filters 3
Generic QRP interface
SI (change of band with internal frequency counter)
FT817 CAT Interface 4
YES (use the RS232 port)
Integration with FDM-DUO
SI (use the EXT I / O port)
5.0-inch display, 6 buttons
Displayed information 5
Input power, direct power and reflected power, SWR, internal temperatures, PA current, spectrum
Remote control of the FDM-DUO via LAN
Service and firmware update
Temperature control with fan management,
hardware protection against high SWR, protection
against high input power, protection against
high output power, band filter control
EXT I / O port
2 USB-HOST ports, 1 LAN,
1 CAT RS232 interface, 1 USB-COM port
Total dimensions (LxAxP)
1 Powerpole connectors.
2 manual attenuators.
3 Requires separate RX and TX paths, see FDM-DUO operation.
4 Detect the band using an internal frequency counter.
5 The spectrum is available only when the FDM-DUO is connected.