NEW VERSION 2016
The ACOM 1500 gives you the ability to easily dispose of 1500 watts output on all amateur bands from 160 to 6 meters .
Frequency coverage: all amateur bands in the range 1.8-54.7 MHz, extensions or variations on request.
Output power: 1200 watt continuous, 1500 W PEP or continuous carrier, no limit on operating mode.
Intermodulation products: better than- 35 dB below rated output.
Power frequency hum and noise: better than- 40 dB below rated output
Harmonic output Suppression: 1.8-29.7 MHz- better than 50dB compared to the rated output; 50-54MHz- better than 66dB compared to the rated output.
Input and output impedance: 50 Ohm unbalanced, nominal value: UHF (SO239) type connector
Connector: UHF (SO239) type.
Input circuit: broadband, VSWR less than 1.3:1, across the range 1.8-54MHz (does not require keeping talking switchings)
VSWR less than 1.3:1 across the range 1.8-54MHz (does not require keeping talking switching cycles).
Bypass path VSWR less than 1.1:1, across the range 1.8-54MHz
Capacity agreed output impedance (antenna): VSWR up to 3:1 or more.
RF gain: 11dB typical frequency response less than 1dB (from 50 to 70 watts of power for the maximum output).
Antenna switch: 3 selectable from front panel antenna
Valve: single individual valve 4CX1000